Tutorial to show you how to do animation fireworks

[Eastenders_4ev@]

hello people have asked me how do do moving firworks like in the banner below so ive decided to do a tutorial,
Im goin to teach you how to make the following
http://img231.imageshack.us/img231/8031/aaatoshowfireworks8fe.gif

First open both paint shop AND animation shop, minimize animation shop for now as you dont need it yet

Firstly make a normal none moving banner like this>>>>>>>>>>

http://img106.imageshack.us/img106/8416/16sg.png


Right Now

Click on Layers then on merge then onto Merge all(Flatten).
Like this

http://img106.imageshack.us/img106/4629/26ac.png

Right now

Click on PICTURE TUBE icon, if you dont know what i mean its the one in the picture below >>>>>>>>>

http://img106.imageshack.us/img106/1010/33kt.png

Then click on the the following icon and select FIREWORKS. if you dont get what i mean, look at the picture to help >>>>>>>>>>>>>>>>>>

http://img106.imageshack.us/img106/1432/49oe.png

Then Click you banner, about in the same place as where the yellow dot is below on my banner >>>>>>>>>>>>>>>>>>>

http://img165.imageshack.us/img165/2353/50tc.png

Now read carefully because we will be swaping from program to program

Click on the hand icon as show in the picture below, then right click your banner and click on COPY

http://img165.imageshack.us/img165/8108/65zv.png

Then open Animation shop and the Right Click and press Paste as new Animation
Should look like the picture below>>>>>>>>

http://img165.imageshack.us/img165/605/72kx.png

will post the rest in about 5 - 10 mins

[Eastenders_4ev@]

right click on your banner in animation shop and select Duplicate Banner

http://img165.imageshack.us/img165/2159/85sy.png

Then click and drag the end so you can see two banner the same like this>>>>>>>>>..

http://img165.imageshack.us/img165/2075/93rc.png

Select the second banner on animation shop, then select animation then Insert frame the EMPTY

http://img165.imageshack.us/img165/5954/103ff.png


Then a box will come up Change NUMBER OF FRAMES to 2 then press ok
Like in picture>>>>>>>>>

http://img165.imageshack.us/img165/3369/115sg.png

Go back to paint shop. Click on picture tube tool again, then click on your banner where the yelloe spot is on the picture below again

http://img165.imageshack.us/img165/7435/129dz.png

will add next bit in 5 mins

[Eastenders_4ev@]

then click back on the hand and right click and copy the banner to animation shop again. then right click and paste then paste into selected frame

__________________________________________________ _________

Then back to paint shop select picture tube again then click your banner where the yellow dot is >>>>>>>>>>>>>>>>>>

http://img18.imageshack.us/img18/2149/125on.png

__________________________________________________ _
Then select the hand icon again, then right click and copy

http://img52.imageshack.us/img52/6186/146pe.png

__________________________________________________ __

The go to animation shop, select next black frame. right click copy and paste

http://img52.imageshack.us/img52/3904/15a5rg.png

__________________________________________________ ___

then its finished lol

[Eastenders_4ev@]

hope this helps ya

[kirsty_g]

thanks for those

[Eastenders_4ev@]

its ok

[Jessie Wallace]

I don't have the fireworks on my psp.

[Eastenders_4ev@]

you might have got a older version ov psp mines 9.01 i think lol

[Jessie Wallace]

Thanks, i've updated mine now, and have got the fireworks, thanks for the tip.

[xXxJessxXx]

K@T!E i have just downloaded a trail for both of these programes. but when i try to paste my banner from Paint shop pro to Animation shop it only pastes the last picture of the banner not the whole banner. :confused:

any ideas as to what im doing wrong?

[xStephaniex]

K@T!E i have just downloaded a trail for both of these programes. but when i try to paste my banner from Paint shop pro to Animation shop it only pastes the last picture of the banner not the whole banner. :confused:

any ideas as to what im doing wrong?

did u select none then layers, merge , merge all flatten ? then copy and paste as new animation in animation shop 3 hun ? i think thats how i do it

[xXxJessxXx]

i tried that but it didnt work still so i saved them and then opened them in animation shop. but how do you get the last bit back to the front one so it flows without stoping? :confused:

[~*~Leanne~*~]

it should flow as long as you don't have any blank slides

[xXxJessxXx]

it should flow as long as you don't have any blank slides

it does flow but i wanted an effect to move into each slide but i cant seem to get it to work fomr the back one to the front. it just changes like cant explain but its just boring. i wnated a special effect like the rest but then it links it to an empy slide.